When grinding wire for fitting O-rings I use an air angle grinder and put a piece of shim stock between the head and wire to prevent bumping the grinding disc on the freshly machined head.
Arus Kinney
AK’s Engine and Machining
Covington, GA
When grinding wire for fitting O-rings I use an air angle grinder and put a piece of shim stock between the head and wire to prevent bumping the grinding disc on the freshly machined head.
Arus Kinney
AK’s Engine and Machining
Covington, GA
If you work on Mini Cooper heads, it is important to replace the aluminum plugs, especially if the...
I had some FE heads with some pretty decent burrs on the valve tips. Instead of slowly turning the...
On race engine cylinder heads that have exotic seat angles, I like to leave myself notes for...