by Donnie Hurt | Mar 21, 2025 | OTHER SHOP WORK
These simple work holding clamps work excellently on the dyno to keep your sensor, oil and control wiring from getting burned or damaged. They’re easier to use than tie wraps and save a bunch of time. You can buy the assortment pack really cheap at home...
by Donnie Hurt | Mar 21, 2025 | CYLINDER HEADS
If you work on Mini Cooper heads, it is important to replace the aluminum plugs, especially if the head has been overheated. These are notorious for popping out after the head has been reinstalled. It’s an easy fix with a tapered 3/8 npt plug that is .462” deep....
by Donnie Hurt | Mar 21, 2025 | TOOLING
Often, you cannot see through your CNC mill’s cabinet window because coolant is splashing on the inside of the window. Rather than create a mess by opening the door to take a peek, install this simple window air blast tube. Your parts list will include a...
by Andy Stacy | Mar 9, 2025 | BALANCING, BORING, CIRCLE TRACK, CLEANING, CNC, CRANK GRINDING, DOMESTIC, DRAG AND DRIVE, DRAG RACING, ENGINE ASSEMBLY, HAND PORTING, HIGH PERFORMANCE, HONING, IRON PORTING, MARINE, MARINE, PIN OILING, RESTORATION, SEAT AND GUIDE, SURFACING, VALVE JOB
SHOP INFO Phone: (256) 582-4112 Email: southernmarineandautomotive@yahoo.com Website: Dyno? Yes SHOP ADDRESS 5552 HWY 431S Brownsboro, AL 35741 United States SHOP CATEGORIES Machining Services: BALANCING, BORING, CLEANING, CNC, CRANK GRINDING, ENGINE ASSEMBLY, HAND...
by Donnie Hurt | Mar 4, 2025 | DISASSEMBLY & CLEANING
I have a never-ending pile of cores being moved around the shop from here to there. I use threaded stud casters to roll them out of the way. These have a 3/8-16 stud, but I also have them in M10 to fit LS blocks and can be used in the bell housing side as well. And...
