by Donnie Hurt | Aug 1, 2015 | DISASSEMBLY & CLEANING
Hollow Dowel Removal Tips To keep hollow dowels from collapsing, insert a short bolt or stud, either an American or a metric, before clamping the pullers collet on to it, or just use a pipe wrench or locking pliers to twist it loose. We sometimes just thread the...
by Donnie Hurt | Aug 1, 2015 | OPERATIONS
THE MOST PROFITABLE TOOL IN YOUR SHOP Ask yourself, what is the most profitable tool in your shop? The answers vary! A lot of machine shop owners will quickly say their flywheel grinder or their guide and seat machine. But the most profitable tool isn’t a machine you...
by Donnie Hurt | Aug 1, 2015 | CYLINDER HEADS
Get The Parts! Customers seem to like to send you cylinder heads without sending the rockers, lifters, cams, cam caps, etc. Always have them bring all these parts so you can check them out along with the head, especially when it is a shim-adjust head with solid lifter...
by Donnie Hurt | Jul 1, 2015 | CYLINDER HEADS
Dead Lifters and Cylinders We had an interesting issue with Cadillac Northstar heads. We did a normal blast, dye check, valve job, stem height adjustment, and surface as requested. We also did our normal vacuum test before sending the heads back. We were then...
by Donnie Hurt | Jul 1, 2015 | ASSEMBLY
Easy Oil Pump Screen Install I just clamp the screen in my brass jaw vise and use a plastic dead-blow hammer to drive the pump onto the screen, being careful to keep them in alignment. This method started when I did not have a driver for an oddball engine. Now I do...
