TRAM WORK PIECE WITH DOWEL PINS

TRAM WORK PIECE WITH DOWEL PINS

Use dowel pins or wrist pins that fit snug in your mill’s T-slots to quickly tram or align a cylinder head, engine block, or vise. (shown using 18mm wrist pins). Also shown above is an alternative method. These simple to machine stepped pins, which fit snug in...
NO MORE SPLIT GUIDES

NO MORE SPLIT GUIDES

The person who taught me to broach bronze liners used hose clamps, but sometimes they crack. More often it’s when it has had a .502” service guide installed. So instead of hose clamps, I bought some inexpensive split collars for 1/2″. A person could machine them...
LUBRICATING LARD

LUBRICATING LARD

I once worked for Roy Johnson’s Automotive Machine Shop. This is where I was introduced to the use of common cooking lard as a lubricant when drilling on steel. Yes that’s right, now you’re cooking with “Bacon” in the shop. The use of the lard...
SHIM FOR PROTECTION

SHIM FOR PROTECTION

When grinding wire for fitting O-rings I use an air angle grinder and put a piece of shim stock between the head and wire to prevent bumping the grinding disc on the freshly machined head.  Arus Kinney  AK’s Engine and Machining Covington, GA...
DOUBLE DUTY

DOUBLE DUTY

I have a cam gear with a chain for checking clearance on the top oil galley area on SB Chevy blocks, which is often an issue. This was a previous Shop Solution. I also use it to check or set-up cam button to timing cover clearance for my engine builders or home...