BROWSE BY CATEGORY
BROWSE ALL SHOP SOLUTIONS
LASHING OUT
LASHING OUT When adjusting valve lash on DOHC Honda cylinder head with oil rails above the camshafts, remove the rails and use a thick nut that the cap bolt will pass through to bolt down the cams. Now you have more room to maneuver your feeler gauges. Ronnie Myers...
MODIFIED PLUG SOCKET
MODIFIED PLUG SOCKET It can be much easier to install and remove spark plugs, when space is tight due to header configuration, by notching out one section of a spark plug socket. This will allow for a better angle, and you can still use the hex head rather than a...
CLEANING INTAKE PORTS
CLEANING INTAKE PORTS After porting an intake manifold or a set of heads, there is going to be quite a bit of sand, aluminum, and other things in the port. It is very important that all of this debris gets cleaned out before assembling the engine. An easy and...
COLD WEATHER COOLANT TIPS
COLD WEATHER COOLANT TIPS With wintertime temperatures approaching, now is the time to ensure that your diesel engine coolant/antifreeze is up to the task and staying in its liquid form. Everyone has a hydrometer or refractometer, and they’re easy to use. The question...
PLUG THOSE HOLES
PLUG THOSE HOLES When I only have only one torque plate I’ll plug the holes on the other side of the block with foam earplugs. They do a great job of keeping honing oil out of these holes. This way, when I change my plate to the other side, the oil or thread lube...
MAG AND GUIDE TABLE
MAG AND GUIDE TABLE When we moved to our new shop location we wanted to upgrade from our traditional oil barrels that we would magnaflux and drive valve guides on to something safer, more sturdy and that would catch the driven out valve guides and magnaflux powder to...
