by Donnie Hurt | Jan 1, 2026 | LUBRICATION & COOLING
I’ve never trusted aftermarket pan volumes. If you are using the factory dipstick and tube, it’s not an issue, but with aftermarket or locking dipsticks, it’s a guess at best. I set a factory oil pan and the aftermarket pan between milk crates. I put 4...
by Donnie Hurt | Dec 9, 2025 | ASSEMBLY
This is a customer’s balancer, though the procedure will work on a new one with the rubber bonded outer ring. I make a groove that runs down to the center hub. I use a chisel or a cut-off wheel, then I take a pick with yellow paint and mark the line. Should this...
